Yep 👍

Tried it a couple of times in a glass bowl. I personally didn't like the experience at all and didn't see what all the fuss is about. It stinks like rotten knickers and is not as fun as lsd. I felt like I was having a nicotine overdose then had mild visuals with a feeling of perpetual boredom- strange but true.

Smoked some in a cheap dry herb vaporizer from Amazon couple years ago

Pre heated it chucked a unweighted amount and n and fucking vibed

Best dimitri experience I’ve had

Other time I did it in a bongo did not go well

I smoked an unweighted amount and felt like I was going to die. Awful. It definitely needs to be weighed.

Give us a bash.

A lot of boof extract going around recently, some looks like crc or distillate and terps, some I don’t even know if it’s even cannabis. Starting to put me off

the myocauts mystery 1g pots are very good

i was eyeing up a bulk order off them nearly hit the button but in nearly 100 buys iv been burnt this week off a new vendor and looks like dispute hence my gut told me hang off and seems iv made right choice sorry wasnt good for you ✌️

The whole oz has gone in the bin,! Worse than the plf drip diamonds! Might have to go on reddit and have a rant!

Seriously though, why would you buy an Oz of shatter from a brand new vendor?....I'm guessing it was super cheap right?...well dems da breaks buddy, you gotta go small at first- although you can still dispute but jeeez louise...

The Ranters Of Reddit all do the same- blast LB because they haven't quite worked it out....

When I asked him if he has smoked any of it, I didn't get a response!!!

contact the vendor first- ideally before writing a review or giving a bad score so they have a chance to put it right.

If they are a good seller they should try to address your issue

He's not reading his messages now. He said he would refund me but didn't know how. Terrible communication from this seller. I wanna warn people, but I also want the refund

https://www.reddit.com/r/CannabisExtracts/comments/8znesm/shady_shatter_extract_adulteration_and_cutting/

Shatter has a history of being adulterated with accusations of things like pine rosin and wax being added by the extractors to push yield

I know other trates can be messed with but shatter often seems to be the one that people have the most obvious issues with

The comms from the seller have been rubbish too!

What about it is so bad? asking out of curiosity as I wanted to grab a gram of extracts as a treat for xmas but have little to no experience in determining it's quality

I can highly recommend myconauts mystery extracts! I got 5, all different flavours absolutely banging. Ghost train haze, Acapulco gold and the wedding cake were my favourites.

i had mystery one pink goo very nice so good ordered 2 mystery more 👍🏻

hoping a diamonds drops im manifesting ghost train haze 🤣

Fingers crossed for you bro 🤞 it’s proper lovely stuff haha

It smells really bad.Got bits of weed in it. On top of that it was poorly wrapped in greaseproof paper

Try our crumble. Very clean extract.

littlebiggy.net/link/kCGjv5

Show us pics of the stuff you got. What's so bad about it?

It smells really bad bud. Nothing like your extracts. Looks a pale colour. Has a foul odour when I put it in my core dab rig, didn't even wanna smoke it, and I've smoked dmt before that didn't smell as bad!

Sorry to hear. Our crumble is pale in colour, looks more like cocaine to be honest. But it burns very clean, leaves no residue etc and stinks of weed. We know the source of all our products.

Funny you should say that I bought a g of the crumble, and genuinely rate it 10/10.

But the missus got to the postie firstz opened it l, and was like seriously that looks like crack. 🤣🤣

One joint later 😵‍💫😵‍💫😵‍💫😵😵

Lovely stuff

I had to resist smoking some myself, it smells beautiful.

I'll be ordering a g more or each

It looks like shatter, but if you could smell it! Looks darker in the picture than it is

Put it in ISO alcohol and see what dissolves and what doesn't. If you don't have that, vodka will work.

If it all dissolves it's just shitty shatter, if some stuff doesn't, it has tree sap in there to bulk it out.

It's not changed much. How long does it normally take? Should I just leave it overnight?

Put around 50ml vodka into a glass. Put that glass in some warm water (no flame)

Put like 2-4g, it should dissolve pretty quickly when warm. Room temp will take a while.

Update. Shatter left, crumble right

Left is the supposed shatter, right is some amnesia haze crumble. The crumble has almost completely disappeared but the shatter isn't going anywhere!

I've got it in iso. But thanks for the info. I'll try again tomorrow

OK I'll try that now. Thanks

Hello
check our items we have shatter and other extracts they are all imported from cali
Radar Breeder

Thanks. I'll maybe give them a try, when and if I get this refund they said they would give me. I normally buy a decent amount

Use Google and put (site:littlebiggy.com) WITHOUT PARAMETERS and then whatever your looking for afterwards 👌

Thats great, even I can do this :)

Thanks for this, we’re a new store and struggling with visibility as we haven’t been coming up on the main page when we search for our store or products. Any advice on this?

Oh my goodness gracious me. THEY DID IT! Keyword search is now a thing. The world is right again.
Ty devs xxx

If you’re on an iPhone when on the main items page, you can type in what you’re looking for in the website address bar, try to keep it limited to one word.

Type in the word of the item you’re looking for in the website address bar and instead of hitting the return button to search it on google, it will also say “on this page (3 matches)” click on that instead of googling the word and it will create a little word finder for the page. Use it all the time when I’m looking for certain strains! Works on every website.

Has CTRL+F stopped working for anyone else? Used to be it would search the whole page, now it only seems to be searching around where I'm scrolled to. Like, I know there's shake somewhere on this page... I can even scroll to it, but it still comes up with 0 results.

Same thing in a bunch of browsers... I think it's to do with how the page loads now. I dunno.

:(

Yeah its stopped working. I feel like it's affected my sales for sure

I was using the function where you type into search bar and then ‘find on this page’ which was working superbly until a week or so ago when the site seemed to change. I like wedding cake or ice cream cake so try to search that and now it says none, even tho I know there is!

Go Items

Choose Destination Country

Let the wall load, fully

Press CTRL + F and type the term you're searching for.

When finding an item of interest DO NOT click, but rather open in a new tab, so you can keep searching on main tab and keep search progress where you left.

Make use of patterns, spaces and then use findings to narrow search like searching for a vendor who seemed to have a good product, or by product name to compare across vendors

On chromium browsers Ctrl+F to “find on page”. On iPhone press the share button at bottom middle , scroll down and click Find on Page. Really useful to search through the items page for specific strains etc

Keyword search not working for me as of 22/6/25.

Can't type or paste into it?🤷‍♂️

hi, have you tried to first click on the `keyword` blue button? Once it becomes red you can actually type into the near input box

Thanks, seems to have fixed it!

We can’t be searched at all on here for some reason, not on wall on items nothing, yet have stuff listed, all was fine building our rep and then yesterday we went quiet wondered why and we can’t be searched at all on LB

Any info on the matter would be really helpful

Or just use keyword on the top of the item page ???

Hey guys why have I sent the exact amount for an order but it still says unpaid. I even went slightly over just incase

Hey EA, it looks like you may have accidentally posted on an unrelated topic (Another way to search LB)

Regardless, I believe there’s an ongoing issue with Transaxe at the moment https://littlebiggy.net/link/cHrgrG

In terms of precise payment amounts, I’ve always copied the number from the transaxe payment page and pasted it into my wallet payment page and all has been fine. With fees as high as they are, you don’t want to be going to the hassle of trying to get overpaid BTC back or wasting any.

Can you not embed a simple coding for search using open ai? Or make a Search bar

I generally assume that if LB doesn't do something (obvious), it's for a good reason (security probably).

Same thing with dates on posts.

I'm in no way knowledgeable about any of this though, so...

👍 There is more flavours on our wall and they are all tasty

I think the price on your supreme og may be incorrect judging by the prices of the other strains. Bud looks nice 👌🏻

Good stuff 🙏🏼

All you bigger boys with your posh Puffcos.

I have a Proxy and it blows my face off. 🤣

I did buy a glass attachment for it which is full of terp pearls.

Nope. Still cough up a lung. 😆

Very noob at dabbing tho. Thought I’d start with the Proxy. It’s so convenient. I’m not doing mountain sized dabs anyway (who can afford to?) and I can just have a cheeky dab wherever. Which is the nice thing about it.

I’m still slightly terrified by a hot dab I had about 10 years ago which completely fucked me up.

Some bloke thought it was funny to basically spike me.

Wasn’t funny.

I am looking with interest at the bigger Puffcos now tho.

If nothing else, this topic should inspire more vendors to stock rosin….

She's a beauty!

Quick update on this one - I've ordered a wym stick from America - let's see it it's worth the hype!

❤️ Here is mine

And this is my best attempt at rosin yet (freshest material) I am over the moon with my diy solventless journey 👌

That looks lovely.

I need more friends like you 😅
This is the kinda DIY we should be focusing on

I bought a Peak Pro 3DXL earlier in the year so I'd me intrigued by input on this. I'm clueless, apart from watching a few videos with people with ludicrously coloured attachments. I don't even know how to choose a terp pearl, or how they spin around.

AFAIK (from my yocan orbit) you can get these joystick replacements that blow directional air in, spinning these quartz pearls that heat up and keep the corners unstuck

So all in all you get better yields and bigger clouds without having to fidget supposedly

So it just spins the balls inside and it breaks up the concentrate or whatever? How do you know how to size the pearls?

Yeah essentially that. There's different size pearls recommended depending on the device, but I think 4mm was the recommended for most

Cheers dude. So 4mm should be ideal for an unmodified 3DXL rig? What influences size choice exactly?

Aye should be good. I think it's down to chamber size and preference ultimately. Too big will result in leakage tho so I'd avoid above 4mm

Thanks for the advice. So I could just buy some pearls to try to start, then contemplating modifying?

Well that's the catch - the pearls don't spin with the standard build, so you need to get a replacement spinner cap to get quartz balls working on your setup. But as davedawgg mentioned, the wym looks to do the same thing and be much cleaner so I may opt for that and report back 🫡

Oh, of course there's additional expense/mods! I'm sticking to joints then, and I'm going to put B&H cigs in it too.

The cost of health eh 😄

Woodbines mate. That’s what you need.

I haven't seen them for years! Probably due to the change in branding regulations. Best import cigarettes were Winstons, I reckon.

I did like a Winston. Or a filterless Camel.

A mate used to insist on skinning up with Rothmanns. 🤢🤢🤮

Tbf the quartz balls are dirt cheap. I got some with an old vape that happen to be 4mm so I'm reusing them. The replacement top is the only pricy bit

Honestly you’re better off spending a bit more and buy a nice rig and a good banger, Puffco only good for being on road, I’ve had them since they first come out, it’s all done out in China, dr dabber is a better choice if you want something like that

Yeah, in the fantasy world that a regular stoner can maintain banger temp while not getting major burns and/or wasting concentrates, etc. 100% hard no with this suggestion.

I would literally burn my whole house down with a blowtorch dab rig.

Bro I’ve worked it out, for hash rosin 60 seconds on 60 seconds off is about 600c for bho id heat for the same amount of time and leave for 90 seconds, I used to have the temp things so I made sure just to time it, every dab I have is on point, dabs are only wasted if it too hot, you can just buy a dab rite then you can hit it at what ever temp you like, I just don’t like the fact is all made in china

I can see both sides to this. I'm not that into concentrates that I want to go for a high maintenance solution just yet, but that may always change. These things also cost a lot of money so it's not like you'll accumulate your dream setup in a day 😄

Softly softly catchee monkey.

Dude, I get off my tits on the daily. You're genuinely living in a world where you think I can heat a banger with a blowtorch AND do everything else?

😂 ye I see where you’re coming from. Tbh it’s taken years of getting 2nd and 3rd degree burns nearly blowing my house up and what have you to have a proper set up, if you need any help can always dm happy to help

My man that is the exact same as me! I appreciate that we are chasing the authentic glass rig hit but I’ll be dammed if I trust myself with a torch in my tiny little stoner shed. Asking for trouble that is 😝

I'd blowtorch my face off, or burn the house down dude! This set up is for people other than us.

People who literally get no effects from a half gram rosin dab are the only people who can be trusted with an open flame. 😆

Bro if I can do it anyone can

I’d end up with a pile of broken glass, burnt carpet and bongwater everywhere.

I have such respect for people who use proper dab rigs.

Tbh it’s taken years or 3rd degree burns smashing glass to eventually have a set up that works perfect, anyone want any help let me know I used to own the uk’s first glass shop

Yeh in UK our options are very limited compared to the US. The ‘new peak’ version of 3dxl atomiser is the 3GXL but again that’s an import from US. The bay has it as 3 grams puffy peak chamber but again it’s a US import. You hear mixed reviews about spinners for our version of the peak. I ordered a Wym stick and had it sent over from US…she’s a beast! I love it so much…huge milky hits with it and Wym himself is awesome to deal with.
Id love to take the plunge and get the 3GXL atomiser and be able to get lots of sick glass pieces but b4 you know it you might as well of got the peak pro with the money spent 😝
Tuff tethers have a good adapter for our model but I can’t find any peoples reviews of it so I haven’t looked to much into it (but in theory it’s a beast)
Hope that helps chief 🫡
And btw…I made a rosin press with hair straightener in a vice…hits 20% yields and I’m over the moon with it ❤️

I was looking at wym - it almost seems like it'd achieve the same thing as quartz balls but they're also just American? Would you say it was worth the money?

For me personally I’d say it was. Changing the air flow restriction is what I was looking for. It does put extra strain on the silicon grommet when it hangs and mine has started to come apart. That is why I’m interested in the tuff tethers adapter as spending £30 on a new grommet seems bs to me.

Did you message that wym guy directly on insta for prices and shipping?

Nope it was all on his website as I guess he gets a lot of international business

Not an expert, but it just seems American sites have more glassware on them so that could be a start, been also looking myself, you could also come across some inst4 glass makers but that's more niche, 710glasswork stock some nice options sometimes it just depends when you look, but they're very expensive, if you stumble across any nice pieces let me know 🫡

Will be reporting back here 🫡

Yeah tbh regardless of whether you go independent or not, you'll need to pay the overseas shipping as it's gonna be from an American vendor. Which isn't ideal in case anything goes tits up haha

The one with the grenade bubbler? I got that one. Less expensive than others but fantastic. Used terp pearls for about 3 sessions, realised there was f all difference to hit, flavour or experience, apart from more cleaning due to sticky balls... so they now collect dust.

I know this thread isn't about e-rig alternatives but unless someone else can really, really convince me about terp pearls/balls whatever, I would recommend don't bother. Then again, each to their own but if anybody does buy some, buy plenty because you will lose some!

If you have the grenade bubbler for the peak then omg I am so jealous! That top looks ace! My friend got some pearls for his glass rig and when it actually worked then I could notice the longer, more cloudy and better hits. But my god was it a pain to get going for us. Needed to be on a completely level surface and always needed a quick big pull at the start to get them spinning and that in turn can lead to product going into areas that are a nightmare to clean. I totally see that they are great for people who have the rite setup and know what they are doing but for us it just wasn’t practical which is a shame. Like you say, it just creates more cleaning (which sucks if you don’t have them working like others do).

Ha! After re-reading my comment, I was referring to Gman27's mention of Core 2 XL but if you do mean the Peak Grenade bubbler, well, that is about half the price of my full Core E-rig. Which has it's own Grenade Bubbler... this is getting confusing!

I hear you on the "spinning". My balls just stuck to the bottom of the chamber collecting resin. Then it was carefully removing the balls, attempting to clean them in iso and then drying and then - ping - lost behind the sofa. Oh well, So it goes.