corr67

chat

send private message

joined mar 2021

share corr67 and generate bitcoin with reference codes.

1 topic on corr67

26 posts

+50 votes

by corr67

Hash Vaping Advice

by corr67

Hash Vaping Advice

Alright Biggaz. My first post on the site, having joined a few months ago. Looking for some advice on most effective method to vaporise hash.
I don't smoke my weed any longer, instead switched to a Mighty a few years ago and then added a Volcano. Since joining LB I've purchased some really nice hash (Bigg up to DIUK) and wondered if anyone can give any tips on the best way to consume for a non-smoker. I've been using a water pipe with this hash, but would rather avoid combustion if possible (but it was good). I've seen Dynavap mentioned on here with reference to hash, but when I check it out online it seems to be for vaporising flower? I'm sure someone here can put me right. Cheers

corr67

Thanks for the comments and suggestions everyone. Sounds as though there isn't a perfect device available for vaping hash, maybe I'll need to stick with the water pipe. Look forward to DR's tutorial on the Dyna / Vapman, think I might like to give this a go. I also like PB's old school suggestion of getting the knives out, it had crossed my mind....

PieBoy

Hot knives are dabs for OG’s

Drgreenthumbni

I have the volcano aswel and have tried everything to get a good vape from hash and nothing has worked,i think it needs more heat,i have tried alot of dif methods but cant get any good clouds or even a good high,hopfully u will have more luck and let me know if u do

Bigbum

Have you tried mixing with weed in a grinder?

Drgreenthumbni

Yea i have tried that and tried using the extract wire wool,i dont like extracts in the volcano either i jus dont think it has enough heat for hash or extracts,its amazing on flower tho and can get a very nice high but iv had no luck with hash,i even tried using my already vaped flower mixed with hash and did like a sandwhich style with hash in middle and already vaped flower on top and bottom,would defo like a good hash and extract vape machine tho

Bigbum

I can manage it in the mighty but always bong the hash now;)

DeadRabb1t

Yup convention vapes struggle to get enough heat into the hash

Drgreenthumbni

Defo man i jus feel like 230 degrees isnt hot enough for hash or extracts,id like one of them dynovapes with a wee heater box thingy,but il needa do more research

DeadRabb1t

230 is fine if it's conductive heat, the problem with convection and hash is the density of the hash itself doesn't allow the hot air to pass through.
Dynavap are primarily a conduction vape so it's directly transmitting the heat into the lump of hash rather than blowing hot air over it.

It can be done, I can run hash through all sorts of vapes the stempod si for example and it tastes lush but the Dyna is go to for it as it's the easiest to get good consistent results 😉

*In my inexpert experience of the world of thermal extraction devices (Ted's)

Father_Jack

Get some degummed hemp fibre:

https://puffpuffpalace.co.uk/products/vape-wool-hemp-fibres

Get the hash broken up as finely as poss (dry sift is probably best I think). and put a layer of it on top of a bed of the fibre, perhaps with another layer of fibre on top.

You can also make a "sandwich" with a layer of hash between flower in a lot of vapes.

Dynavaps works great with hash in this way, but you can apply the same principle to many other vapes. Higher temps for the win once the tasty terps have gone at lower temps.

PieBoy

If you get the adjustabowl dynavap (2020/21) it works better than previous with the closed up bowl. I gave up and got the coil and now vape concentrates and get knives out for hash.

DeadRabb1t

I find replacing the Dyna cc'd with cheap pipe filters dramatically increases the airflow
Then by using small amounts of hash pushed to the edge of the tip leaving a air path down the middle works best for me
That way when it gets gunked your chucking a cheap pipe filter 👍

DeadRabb1t

I have promised another user I will put up a dynavap hash tutorial

But basically hash is harder to make work in vapes and while I have had limited success in mighty style vapes a dynavap or vapman kick their arse

I shall try to get something posted in the next day or two covering it all 👍

DrBurke

I look forward to seeing your tutorial. I tend to use the Dynavap for weed and stick hash in a pipe. I can get hash to vape in a Dynavap if i go over the click, but strangely I find some types of hash don’t taste as nice vaped. I know you get a different flavour profile vaping and for me, I don’t like it in some instances. Might be a personal thing! Cheers!

DeadRabb1t

I don't know if I'm just really really lucky or if I'm doing something different when heating but I don't need to run any of my dynas past the click on either a torch or the Dynatable

I get the taste thing especially as hot metal is most definitely part of the flavour profile when doing hash in a Dyna

There's one called the vapocane or something that's all glass that I have half considered but... Glass 🤷‍♀️😉

DrBurke

I’ll check the vapocane out. That’s a good point about the hot metal and the hash!

DeadRabb1t

The vapman is my favourite vape for hash but...

There really hard to get until September 10th

So I'm keeping quiet till I have seen the new ones

Father_Jack

Prior to the Vapman relaunch under the new owners, you can still buy an OG Vapman in the UK from refinedretail.com

They have them in walnut and olive wood at the moment.

DeadRabb1t

Wow that's a website I didn't know about

Having a browse now as mines a unfinished pear 🍐

Father_Jack

They are legit, I got my yew tree Vapman from them. :)

DeadRabb1t

Must stop looking... My pear doesn't have the mica base.

Am trying to tell myself I don't need another one

🤷‍♀️😍

Father_Jack

https://imgbb.com/k8mTVyK

I'll say no more in that case!

Btw, check out the new range of mouthpieces - the long glass one will be ideal to add more cooling at those higher hash temps:

DeadRabb1t

I have a glass one from a MFLB (though I don't have a MFLB) and that's pretty good for a stop gap but yeah all of the new vapman stuff looks sexy as hell 😍

Father_Jack

Sweet, I'm sure that works about the same to be fair.

Agree about the sexiness! Hope to get a station next year when they come back if I can save the pennies.

3 posts by corr67

2 posts

+4 votes

pinned

on DeadRabb1t

Dynavap setup for hash as used by me

My 21 M just arrived today. Loved it straight away, first try. Watched a couple of utube demos, but thought it was fairly easy to get hang of. Have on… + 2 more

+20

pinned

on DeadRabb1t

Dynavap setup for hash as used by me

Yeah, I will be honest there is a definite "gap" between what my head imagined this would look like and what it actually is gonna look like 🤣🐰

*Disclaimer this is how I setup my dynavap in manner that gets me consistent hits and results for green and hash however it might not be to everyones preference 😊

Ok so what Mr plastic brick man is trying to show here is that I have as pushed the condenser further down the main body than you would expect, this forces more of the condenser into the tip increasing draw resistance without having to close or restrict the airport I drag on my Dyna like a hand rolled joint and this is what enables that multiple mouth to lung hits off a single heat session (in my belief)

Below that we have screens, you can use pretty much anything but I currently like the 15mm platform style one for increased airflow,.ease of positioning for reducing ovens size and cost as there really cheap.

To the right of that the ball is the amount of hash I use, if it's dry sift it then goes to look like on the right if it's a sausage one look left ☺️

The rest of the posts will be disjointed eventually I would imagine sorry for rambling but the RSO is definitely kicking in now

+5.8

DeadRabb1t

Trying to show flame size and where I heat on the cap and in position to the lighter.

The trick here is slow and steady, if it's not got you thinking "wtf why hasn't it clicked" for at least a couple of seconds before the click on the first heat your rushing it 👍

Oh and if your caps are like mine

Respect the click!

pollypuff20

It clicks?!😳….why does nobody tell me these things?! 😖

bpwmemmott

Is that a single flame lighter? I swear by a triple flame one myself.

+1.8

DeadRabb1t

I use triple flame for outside or when using my Ti tip, for hash it heats up too fast for my liking hence why single tiddly flame 👍

+4.8

DeadRabb1t

Press the hash to the sides, it's the conduction of the heat that's gonna make it all work 😍

tomlittle

Does this method leave a very dirty oven DeadRabb1t? Or is it easy to clean?

I'm using the full oven with very light cotton bacon wrap which helps keep oven clean but would rather not have the cotton in there if I could help it.

Have you ever found a good way to vape the melty hashes? They taste lovely in the Dyna but it just melts out of the bacon.

DeadRabb1t

It was fairly easy to clean out if I recall but tbh I haven't used a dynavap now for a while

Melty hashes and concentrate work well folded into a screen imo

Viper201

I am using the same amount of hash tho, roughly

+0.8

DeadRabb1t

👍 it's a definitely a less is more thing for me as much as the temptation to ram it in there is 😂🐰

Apexskunk2

Looks like mr bond is cleaning his gun 😂

Great guide though mate, wish I could hit consistently with mine.

pollypuff20

Me too Skunky…..just gave up in the end🤷‍♂️

+2.8

DeadRabb1t

Showing oven size

Viper201

Top guide, this will help a lot of people.

Michellis

So the basic jist of this is that you make the oven much smaller. Is that right??

+1.8

DeadRabb1t

That's one of the points, I was hoping to show a bit more so if that's all you got I need to rethink my photos

Was trying to demonstrate everything from how I set up airflow on the Dyna to the amount of hash I find works well . 👍

+3.8

DeadRabb1t

There are different dynavaps but they all operate in the same manner. The M series is the entry level Dyna experience, some people buy one and that's it. Others like myself get into the collection of tips and stems and start treating it like stoner Lego!

But yes buy a 21m as a starting point and see what you think ☺️

It's a very very different experience to a session on something like the mighty 😜

+3.8

DeadRabb1t

That's great news 👍 I loved mine from the first go too.

Be warned the expression "stoner Lego" is very relevant to dynavaps if you want it to 🤣😜

DrBurke

Thanks for this. Interesting use of the screen. I’ll have to give it a go. Nice one for taking the time to put this together.

+2.8

DeadRabb1t

No worries, hopefully you will get something useful from it.

I feel that the biggest thing that upped my hash game is actually with reflection pushing the condenser further in so I don't need to flutter. It takes one element of randomness out of the process and helps improve repeatability (in my little rabb1t head it does at least 🐰😏)

B0W13

Thanks for this, great schematics!
Ive fallen back in love with hash since being on LB and the 21m is on my ever growing list of things i need in my life, any recommendations on a good triple flame lighter?
My last one gave up the good fight recently!

Viper201

Definitely a few things I can change, I never moved the condenser down, and I was heating further down the tip than you are, I think I also need to buy a new lighter as my jet flames won’t let me adjust that small

+0.8

DeadRabb1t

Just set your lighter to the smallest and move it a bit further away 😜

RedworthDispensary

Hi I have some delicious french almond coming in from France 🇫🇷

1 post

+2 votes

on eddie73

5 years and counting

Five years, eh Eddie, you must've seen some changes during that time, not only with the vendors but the products on offer. Earlier this year for me, M…

+12

on eddie73

5 years and counting

I'm a couple of months past 5 years on this, the best site of the interwebnet

Out of interest, I wondered how long the rest of the LittleBiggy Fam have been here?

I remember when I first joined, UK sellers were very rare indeed and I was buying my weed from Spain, Holland and even Canada. Waiting on the post was painful.

I miss the non crypo based payment option (mainly due to the fees etc) but get why its like that now.

I wonder if I'll be writing similar in another 5 years, or lets hope the UK laws are sorted.

Peace

Eddie

+5.2

zz87

I might be confused not sure just how old this place is but I think I remember first visiting this at least 10 years ago and there was nothing at all on here then but fake nike shox and ipads lmao

Just over a year buying weed on here, hope I get to make a 5 year post but I hope by then this is the UKs leading legal/decriminalised marketplace so we can just pay with actual money lol

Lord Terpshire

i remember when it was in a village square and all they sold were rodents and magic potions

Freeupkiwi

Congrats on your 5 years! I joined the month coronavirus was mentioned for the first time! While staying with my mother I got rather desperate for a smoke and typed on google ‘weed to buy uk’. A few days later I had 3.5 purple chemdawg from drugs inc uk and 3.5 blue ched from greenteam. Got myself a room in a Premier inn. And got stoned as fuck. Usually use a local guy now but love this website and try to dabble when I can! And what a saviour during lockdown!! Peace

xs8

Since August 2019 on LB.

Now I'll love to see more EU based vendors...

pollypuff20

Wow…you’ve seem ‘em come and go! 😵‍💫
What vendors on here now where about back then?
Was the internet coal fired back then? 😀

Petitefleur 10/10

Not sure any of the vendors are OGs now. I managed to refind pope of dope recently which was cool. I see hogwarts still plugging too...just not here

pepsi_max

Lurked for a long time, making sure everything was legit and since my first purchase, have never looked back

Srfcsean 9.5/10

Well done man , Eddie keeping it steady , prefer more USA vendors Had a good run with them , the world has changed dramatically since I joined this first

dwarfedgiant

Joined Nov 2020 but was lurking for a few months prior. Kept thinking it was too good to be true but grew some balls and joined. Wish I knew about this place years ago!! I read further down that the site has been a thing for 10 years. Had no idea it had been around for so long. Congrats on 5 years!! Should get a voucher ha.